CCTV Night Vision / IR Camera Issue Fix

🌙 CCTV Night Vision / IR Camera Not Working? Get It Fixed in Ahmedabad

Are your CCTV cameras failing to capture footage after dark? If your security system works fine during the day but shows a black screen or poor visibility at night, you’re likely facing an IR (Infrared) night vision failure. At 99Technologies, we provide fast, affordable, and expert CCTV night vision repair in Ahmedabad, helping restore full surveillance protection across homes, offices, warehouses, and commercial spaces.

Night surveillance is just as important as day coverage — don’t leave your property vulnerable to blind spots after sunset. Our technicians are skilled in troubleshooting IR LED failures, night mode sensor issues, and low-voltage or moisture-related faults common in bullet, dome, and IP cameras.

📹 Types of CCTV Cameras We Repair

We support all major CCTV types and brands with infrared night vision features:

• IR Dome & Bullet Cameras with night mode

• Analog cameras connected to DVR (AHD, TVI, CVI, hybrid)

• IP Cameras with IR Auto-Switch or Manual Night Mode

• Wired & wireless surveillance systems

• Indoor/outdoor cameras with IR LEDs or IR cut filters

• Night-vision-enabled CCTV used in residential buildings, shops, societies, godowns, offices, and showrooms

✅ Supported brands include: Hikvision, CP Plus, Dahua, Imou, Godrej, Zebronics, Zicom, Realme, Mi, and other OEM models.

⚠️ Night Vision Problems You Shouldn’t Ignore

CCTV night mode issues are usually visible after dusk. If you see any of the following symptoms, contact us for a quick repair:

• Camera footage is pitch black at night

• IR LEDs are not glowing or flicker irregularly

• Night video is foggy, grainy, or overexposed

• Camera fails to switch to night mode automatically

• Night footage shows for a few minutes then disappears

• Footage visible only in lit areas, fails in darker zones

• White screen during night hours

• Camera IR works intermittently

These are common signs of IR board damage, sensor failure, low voltage, or firmware issues — and most can be repaired the same day.

🔧 What We Fix During Night Vision Repair

Our team provides detailed repair and replacement for:

• 🔌 IR LED Board: Resolder or replace damaged infrared LEDs

• 🔁 IR Cut Filter Mechanism: Adjust or clean stuck night mode switches

• ⚙️ Auto-Switch Faults: Reconfigure firmware or replace light sensors

• 🔍 Lens Fogging: Clean internal lens moisture or apply anti-fog coating

• ⚡ Voltage Issues: Fix wiring, power adapter, or supply line inconsistencies

• 💧 Moisture Damage: Dry or replace boards damaged due to water ingress

• 📷 Full Camera Replacement: Suggest suitable new models if beyond repair

We keep generic IR boards and brand-specific replacements in stock to reduce downtime.

✅ Why 99Technologies Is Trusted for CCTV IR Repairs

• 🧠 Technicians trained in IR night vision and signal circuit diagnosis

• 🔧 Repairs done onsite or at our Ahmedabad workshop, based on camera condition

• ⚡ Same-day service availability for urgent repair needs

• 🏠 Service for all property types: homes, clinics, offices, apartments, shops

• 🛠️ We understand brand-specific firmware, IR range behavior, and DVR/NVR settings

• 💡 Free guidance on improving placement, lighting, and avoiding future IR failure

• 📅 AMC support available for long-term maintenance and bulk system health checks

Whether it’s a single faulty camera or an entire setup with IR problems, we’re ready to assist.

🔍 How We Diagnose & Repair IR Night Vision Issues

Our process is systematic and precise:

1. Onsite Inspection – Check IR LED glow, lens fog, and low-light visibility

2. Power & Voltage Testing – Ensure stable 12V supply and DVR output

3. Sensor & Mode Diagnosis – Test auto-switch or filter activation

4. Board Repair/Replacement – Swap or repair IR modules or boards

5. Configuration Reset – Reset camera or DVR/NVR for IR compatibility

6. Night Testing – Recheck after sunset or simulate dark room for testing

7. Placement Review – Suggest better positioning for full-range IR coverage

📈 We also recommend upgrades if your camera is too old or repeatedly failing due to environment or voltage instability.

💰 Transparent Service Charges

🎁 Combo pricing available for 3+ camera inspections or multi-site service.

🛡️ Warranty & After-Service Support

• 🛠️ 3-month warranty on repaired IR issues

• 🔁 Up to 6 months warranty on IR board/component replacement

• 🆕 1-year warranty on new camera installations

• 📋 Ongoing support for firmware reset and IR mode guidance

• 🧼 Moisture-proofing and cleaning tips to prolong camera life

🧾 Billing, Payment & Documentation

• ✅ GST-compliant invoice for home and business clients

• 📩 Invoice via email or WhatsApp (PDF or printed copy)

• 💳 Accepted payment methods:

  • UPI (PhonePe, Google Pay, Paytm)

  • Debit/Credit Cards

  • Net Banking

  • Cash (at-site)

🔦 Night Footage Not Showing? Let Us Fix It.

Don’t let your security cameras go blind after sunset. Whether it’s one IR dome or a full CCTV setup with night vision issues, 99Technologies offers affordable and expert IR camera repair in Ahmedabad. Schedule a visit now — we’ll bring the night back into view.